D Type Rubber Dock Fender

The D Type Rubber Dock Fender is one of the most popularly used as a fender attached to a large and small vessels. Simply put, it is a bumper on ships to absorb collision or incoming impact that can cause severe damage. The captain will also have peace of mind because their berthing will be more efficient and maximize the space in docking areas. When choosing a dock fender, essential things must be considered, like berthing data and its design. By knowing the factors, you will find the best quality of fender you are looking for in your vessels and docking area.

Different dock fenders are available in the market, such as foam fenders, cone shapes, cell fenders, tug boats, roller fenders, and D types. The D Type is one of the most popular due to its durability and ease of maintenance. It is also used in commercial and industrial areas, such as loading/unloading, to prevent collisions between structures and trucks. Its shape is comparable to the letter “D” or a cylindrical pattern, which gives a superior reaction force. It also has punched holes in the back for easy replacement and installation.

Overview History

The D-Type rubber dock fender has been integral to maritime history for decades. It is a pneumatic fender that absorbs the kinetic energy between vessels and docks, thus protecting them from damage. Initially developed in Japan during the 1950s, it quickly spread to other parts of Asia and Europe due to its superior performance as compared to other similar products on the market.

Over time, improvements were made to the design, leading to even better protection for both docks and vessels. Today, D-Type rubber dock fenders are widely used around the world—in harbors, ports, and marinas—and are considered one of the most reliable protective measures against accidental collision or impact of ships against structures such as piers or jetties.

Installation of D Type Fenders

These simple steps will ensure that the installation of your fender is successful and secure.

You’ll need to measure the area where you wish to install the fender. You’ll want to ensure it fits properly before beginning the installation.
Use the mounting holes at each end of the fender as a guide for drilling pilot holes in the dock or boat surface.
Be sure to insert plugs into each hole before proceeding with the installation.
Attach stainless steel mounting hardware into each pilot hole so that it is firmly attached to the protected surface.
Afterward, place the fender in position and firmly tighten the nuts to ensure a snug fit.

Cost Analysis

The total cost of operating these types of fenders can be broken down into two main categories: installation and maintenance costs.

The installation cost of a D Type of Fender will depend on several factors, including the size and scope of the project and the type of fender chosen. Other considerations will include any necessary tools or materials for a successful installation. Maintaining these fenders can also add up over time. Still, by adequately cleaning them regularly and replacing worn-out parts when necessary, the overall maintenance costs can be kept to a minimum.

Maintenance of D Type Fenders

D Type Rubber Dock Fenders are designed to protect a vessel, dock, or other structure from damage due to collisions. Ensuring your D Type Fender is regularly maintained will help ensure it does its job as intended and can extend the life of the fender. Here are some maintenance tips for keeping your D Type Fender in good condition:

Regularly inspect your fender for any signs of damage or wear. Check the fender’s cover and ensure all hardware is secure, no tearing has occurred, and no areas with abnormal wear. Look for signs of leakage around valve stems or at welds. If you find any indications of damage or wear, then take steps to repair them immediately.

D Type Dock Fender Features

Maintenance-free and easy to replace
Very light; can be easily cut when needed.
Cost-effective solution among other fenders
Suitable for small up to big vessels
It has excellent energy absorption and reaction force.
Can withstand high and low temperature
Made from high-grade rubber raw materials
Strong resistance to corrosive

RK Rubber Philippines has been supplying and manufacturing custom rubber products for over two decades, including large products such as rubber dock fenders, reassuring our good service and product quality to your needs. For more details about D Type Rubber Dock Fender, kindly contact our sales team.

Dock Fender Quick Details:

Application Type: Marine, Industrial, Commercial, Engineering
Material: EPDM, Natural Rubber, Synthetic Rubber
Color: Black
Variants: D Type Dock Fender
Purpose: Prevents collision between vessels and ports with an excellent reaction force.

Below are some of the actual products and applications.